Home > Products > Textile machine > Machine fittings

vacuum sintering furnace

Categories：	Textile machine / Machine fittings
Usage：	furnace

Contact Infomation

Shanghai Hao Yue furnace technology Co., Ltd.

Tel:	86-21-51095297
Fax :
Country/Region :	China
Address :
Contact :	Li Wei ()

Detailed Product Description

FOB Price：
Origin：
Minimum Order：
Monthly Production：
Delivery Time：
Preferred Payment Type：

Description: What knowledge should be known when using vacuum sintering furnace?
Vacuum sintering furnace is under the protection of hydrogen after vacuumizing. It uses the principle of medium frequency induction heating to make tungsten crucible in coil produce high temperature and transmit it to work by thermal radiation. It is suitable for powder forming and sintering of refractory alloys such as tungsten, molybdenum and their alloys in scientific research and military units. The place where the vacuum sintering furnace is installed should meet the requirements of vacuum hygiene. The surrounding air should be clean and dry, with good ventilation conditions, and the working site is not easy to raise dust, etc. When using vacuum sintering furnace, we should know these knowledge.
1. Check that all parts and accessories in the control cabinet are complete and intact.
2. The control cabinet is installed on the corresponding foundation and fixed.
3. According to the wiring diagram and referring to the electrical schematic diagram, the external main circuit and control circuit can be connected, and the reliable grounding can ensure that the wiring is correct.
4. Check movable parts of electrical appliances should move freely without stuck.
5. Insulation resistance should be no less than 2 MOhms.
6. Valves of vacuum sintering furnace must be closed.
7. Control the power switch on the switch.
8. Manual pressure regulating knob rotates head counterclockwise.
9. Put the alarm button on the open position.
10. Complete the connection of the circulating cooling water according to the plan. It is suggested that the user connect a standby water (available tap water) at the total inlet and outlet pipes of the equipment to prevent the seal ring from burning out due to the failure of circulating water or power failure.
Email: haoyue@haoyue-group.com
Source:****

Related Products

: ABB DSQC612

: Woodward 9905-969 in stock

: ABB 900056 1Gb SD-card S2 DDR

: ORIGINAL SIEMENS 6ES5948-3UA11

: Professional Team | Hydrogen production from water

: YOKOGAWA AAI543-S00 S1 IN STOCK